SW - Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
SWI - Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
SWC - Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
SWCI - Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
SWG GRAFHITE.jpg
SPIRAL WOUND GASKET
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
SWI - Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
SWC - Outer Ring Type
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
SWCI - Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
SWG GRAFHITE.jpg
PTFE SPIRAL WOUND GASKET_clip_image001.jpg
SPIRAL WOUND GASKET
CV. UTAMA BERDIKARI
PVC FOAM BOARD, SPIRAL WOUND GASKET, SWG, KUMATEK, STRETCH FILM, SPONGE STICKER, EVA SHEET, ACRYLIC, PERTINAK, PVC DOP, NYLON, TEFLON, KARET SINTETIS, kARET LIST, KARET LIST PANEL, KARET JERMAN, DEMPUL DANKDEUTZ, POM, KARET CETAKAN, SPIRAL WOUND GASKET, PE POAM, KARET LIST ACRYLIC, ART BOARD, WHITE PAPER BOARD, PVC FOAM BOARD, RIGID FOAM, KARET LIST PANEL. kARET LIST ALLUMUNIUM, KARET SILIKON MERAH, kARET SILIKON TRANSPARAN, POLYFOAM, KUNCI PANEL, SPONGE ALAM, PERTINAK, NOVOTEK, , PVC CURTAIN, AEROTAPE, RUBBER NEUPRAME, SUPER ALLUM. SPESIALIS KUNCI PANEL ADALAH PENJUAL DAN PENSUPLAI KUNCI PANEL LISTRIK, BOKS GENSET, RACK SERVER, HYDRANT BOKS, SERTA BOKS BOKS METAL SHEET LAINYA. TERSEDIA BERBAGAI MERK DAN BERBAGAI TYPE DAN MODE, KUNCI HANDLE, KUNCI PUSH, KUNCI PENGAIT, ENGSEL DAN SEBAGAINYA
Langganan:
Postingan (Atom)
